The PLANET ERT-805 Enterprise Serial router provides a serial WAN port, which is T1/E1 interface, one 10/100Base-TX LAN port, and one console port for Internet access for both servers and LAN side. Because of the compatibility with Cisco routers, ERT-805 can easily connect to your ISP and headquarter just like Cisco 805 serial router.
The ERT-805 provides QOS and Queue to optimize bandwidth usage. The other capability that ERT-805 provide is Network address Translate (NAT), Context-based Access control (CBAC), access-list and Virtual private network (VPN) for network security. ERT-805 enables small and medium enterprise to conduct business over the Internet while protecting valuable resources. This router provides a serial port that up to 2Mbps (E1) bandwidth and also provides a reliable and stable path to Internet.
Product Positioning
SME V.35/X.21 Serial Router
With the support for V.35/X.21/V.24 interface, up to E1 line-rate can be build directly for the connectivity of enterprise to Internet, or enterprise to enterprise over E1 line.
Key Features
WAN Connectivity
One serial interface support V.35 DTE/DCE, X.21, V.24, RS-232, up to E1 line rate
Support PPP, frame-relay, X.25, HDLC, SDLC, SLIP and Stun protocols
LAN Connectivity
One RJ-45 Ethernet for 10Mbps, 100Mbps auto detection
Complies with IEEE 802.3 10Base-T, IEEE802.u 100Base-TX standard
Management
One RJ-45 console interface for terminal program management
Command line interface for full feature control Telnet, SNMP supports
Routing capability
Provide RIP 1, RIP 2 and static routing protocol
Support EIGRP, OSPF routing protocol
Security
AAA (authentication, authorization, accounting) with PAP (Password Authentication Protocol), CHAP (Challenge Handshake Authentication Protocol) and CBAC (Content-based Access Control) for network security
Provide Access-list (ACL)
RADIUS (Remote Authentication Dial-In Service)
Network Address Translator (NAT) simultaneous use of one IP address
VPN (Virtual Private Network) with IPSEC / IKE and GRE
QoS Provide WFQ, priority queuing, custom queuing and rate-limit to increase bandwidth performance and network efficiency
SPECIFICATION
Product
Model
ERT-805
Hardware
LAN
1 x 10/100Base-TX (RJ-45)
WAN
1 x Serial Port (DB-25)
Console
1 x RJ-45
Power
100-240V AC, 50/60Hz
LED
5, power, LAN Speed, LAN, WAN and Console Link/Activity
OS operation
Communication
PPP, frame-relay, X.25, PPPOE. HDLC, SDLC, STUN and LAPB
Security
ACL, NAT, AAA, RADIUS, PAP, CHAP and CBAC
Route protocol
RIP V1 and V2, CDP, OSPF, EIGRP and static route
VPN
IPSEC and IKE, GRE
QOS
WFQ, CQ, priority queuing and rate-limit
Dimensions
217 x 135 x 43 mm
Application
DHCP server, PING, Trace Route, telnet, TFTP
Management
Telnet, Console
Environment
Temperature: 0 ~ 50 degree C (operation); -20 ~ 70 degree C (storage) Humidity: 10~90 % (non-condensing)
