|
The WGS3-2620 is a 26-port, IP-based Layer 3 Ethernet Switch with 24-port 10/100Mbps and 2-port 1000Mbps copper interface.
The two RJ-45 copper ports support 1000Mbps auto-MDI detection that can direct connect to any Gigabit Ethernet Servers, Switches, L3 backbone with a straight Category 5/5e, 8-wire UTP cable. 24-port 10/100Mbps for L2/L3 network connection.
The wire-speed switch engine provides up to 8.53Gbps switch fabric for L2 and L3 IP routing capability.
Up to 256 IP subnet / L2 tagged VLAN are also available to segment the IP or MAC-based networks.
IEEE 802.1D Spanning Tree, bridging, Port mirroring and IEEE 802.3ad port-trunk also support for optimal LAN connection and diagnose. IGMP snooping, filtering, dual priority helps to build a multimedia networks like video-conference etc.
Designed to offer the guaranteed IP Layer 3 routing, the WGS3-2620 empower the performance of pure IP-based network easier then ever.
|
| SME IP Routing Switch |
With the non-blocking L2 back plane, L3 wire-speed forwarding, to build a high performance IP-based switched network is as easy as
install a Layer 2 switch. Up to 256 VLAN easily build up the required IP network as network grows. Web, Telnet and console
management plus RMON and port mirroring ease the management effort.
|
| Key Features |
 | 2-port 1000Mbps, 24-port 10/100Mbps Ethernet Switch | |
Complies with IEEE 802.3, 10Base-T, IEEE 802.3u, 100Base-TX and IEEE 802.3ab, 1000Base-T standards | |
IEEE 802.3x, full-duplex flow control compliant; back-pressure half-duplex flow control | |
IEEE 802.1p, dual priority; IEEE802.1Q, VLAN Tagging; IEEE 802.1D Bridging compliant | |
32K MAC address table auto-ageing / 64K IP address at most | |
IPv4 Layer 3 routing, supporting RIP-1/2, OSPF (Open Shortest Path Fist), DVMRP (Distance- | |
Vector Multicast Routing Protocol) | |
8.53G non-blocking, Store and Forward switching architecture | |
RS-232 console interface for console program managements,Web / Telnet Support | |
IEEE 802.3ad link aggregation, port-based Trunking support increase the bandwidth between switches (2/4/8-port in one trunk) | |
256 port-based VLANs eliminate the broadcast-packet, increase the LAN security for different segments | |
IGMP multicast snooping and filtering | |
Port mirroring for port traffic diagnose with sniffer programs | |
RMON group 1, 2, 3, 9 support | |
19", 1U height rack mounting | |
100~240VAC, 50~60Hz universal Power input | |
FCC, CE class A compliant |
|
| SPECIFICATION |
Product |
|
Model |
WGS3-2620 |
HARDWARE SPECIFICATIONS |
|
Ports |
24-port 10/100Base-TX, RJ-45 Interface
2-port 1000Base-T RJ-45 Interface |
|
Speed per port |
Port 1~24: 10/100Mbps, Auto-negotiation, Auto-MDI
Port 25, 26: 1000Mbps, Auto-negotiation, Auto-MDI |
|
LED Indicators |
Port 1 ~24: Two per port; Link, Mode (Modes include FDX, ACT, Speed)
Port 25, 26: Two per port; Link FDX |
|
Rack Mount |
1.U, 19" Rack mount |
|
Dimensions |
430 mm x 334 mm x 44 mm (Wx D x H) |
SWITCHING SPECIFICATIONS |
|
Architecture |
High Performance Store & Forward Switching Architecture |
|
Memory |
4MB |
|
Switching fabric |
8.53Gbps |
|
MAC address Table |
Layer 2: 32K MAC-entry
Layer 3:64K IP- entry |
|
Forwarding/filtering rate |
Layer 2 wired speed forwarding
Layer 3 wired speed forwarding |
|
Error Checking |
Runt & CRC on all network packets |
|
Media Type |
RJ-45 STP, Port 25, 26 MDI Auto-detect |
|
Network Management |
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1Q VLAN, up to 256 VLANs
IEEE 802.p dual Priority
IEEE 802.1ad Link Aggregation
IEEE 802.3x Flow control
RFC 1757 RMON, Group 1, 2, 3, 9
RFC 2236 IGMP (Internet Group Management Protocol)
SNMP MIB II,RFC 1213,RFC 1516
Port Mirroring, Static MAC, Static IP, MAC filtering, IP filtering
|
Environment Specification |
|
Cabling |
100Mbps: Category 5 UTP, 4-wire
1000Mbps: Category 5/5e or above, 8-wire |
|
Protocol Compatibility |
Layer 2: Transparent to higher layer protocols
Layer 3: IP RIP-1, RIP-2 OSPF, DVMRP |
|
Power Consumption |
65 watts / 220 BTU |
|
AC Power |
100~240V AC, 50/60Hz auto-sensing |
|
Temperature |
0~40 degree C operating |
|
Humidity |
10~90% non-condensing |
|
Emission |
FCC Class A, CE mark |
|
|
| Ordering Information |
| WGS3-2620 |
24-port + 2 Gigabit-ports Layer 3 Managed Switch |
|
|
|
Copyright© 2003 - 2008 - Todos os direitos reservados -
CONNECTLAN Comercial do Brasil Ltda.
Av Pedro Bueno , 1.119 - Jabaquara - São Paulo - SP
Telefone: (11) 5031 - 4669
e-mail: connectlan@connectlan.com.br
|
|
|
|
|
|
