The PLANET FT-70X is Fast Ethernet 100Base-FX fiber to 100Base-TX shielded twisted pair (STP) converter. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. In fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.
Key Features
Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
Connectors: One RJ-45 Twisted Pair, EIA568
One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model
FT-706A15: Tx-1310nm, Rx-1550nm
FT-706B15: Tx-1550nm, Rx-1310nm
Data Transfer Rate:
TP: 100Mbps
FX: 100Mbps
Duplex mode support: Full or half-duplex mode by Auto- Negotiation (TP)
LED indicators: PWR, TX-LNK, TX-ACT, FX-LNK, FX-ACT, FDX
SPECIFICATION
Product
Model
FT-70x
Protocol
IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions
70 x 97 x 26 mm (W x D x H)
Weight
0.2kg
Power
5V DC, 2A, max.
Connectors and Cables
Twisted Pair / STP
RJ-45, Category 5 (EIA/TIA 568)
Fiber-optic
Vary on model;
X=1,2,3,4,5,6
1:ST
2:SC
3:MT-RJ
4:VF-45
6 Single SC; WDM
