8-port 10/100Mbps Fast Ethernet Switch w/802.3af splitter built-in
Download Datasheet
The PLANET FSD-803PE is a cost effective 8-port switch with 1-port 802.3af splitter built-in. The 8-port switch provides eight 10/100Mbps Fast Ethernet interfaces that can be directly installed as a small workgroup. Port#1 of the FSD-803PE also supports 803.3af Power over Ethernet Standard.
Support dual power system, FSD-803PE either can be powered by 12VDC from the local AC outlet, or can be powered remotely through 802.3af Power over Ethernet standard. Port# 1 of the FSD-803PE supports IEEE802.3af Power over Ethernet standard that can negotiate with the remote 802.3af whether to feed the power or not. As soon as the network manager deploys the IEEE802.3af devices in the computer room such as the PLANET POE-150, the FSD-803PE can be powered from the POE equipment. For example, if there is a PC located at 200 meters away and would like to get connected, FSD-803PE would offer the most convenient way to make it. The manager needs simply to install FSD-803PE at the middle of the PC and the central network where 802.3af power over Ethernet feeding the power needed for the FSD-803PE. No additional power outlet is required.
With Auto-MDI support, FSD-803PE can direct wire to any Ethernet / Fast Ethernet devices through Category-5 UTP cable. LED indictors help diagnose the activities of the switch.
Product Application
Department Switch
Supporting 802.3af power over Ethernet, the FSD-803PE can be installed as a small department switch that gets the power from central, power-managed network through its port#1. This shall help the network installer free to find an AC power outlet for this remote switch, and also free from power shutdown if a UPS is installed in the central computer room.
Key Features
Complies with IEEE802.3, IEEE802.3u, IEEE802.3af Ethernet standards
8-port 10/100Mbps Ethernet ports
1-port (port#1) support 48VDC in-line power
Dual power system can be powered either from POE port or from local AC adapter
Hardware based 10/100Mbps, half / full-duplex and 1000Mbps full duplex mode, flow control and auto-negotiation
IEEE802.3x flow control for full duplex operation and back pressure for half duplex operation
Integrated address look-up engine, support 2K absolute MAC addresses
Automatic address learning and address aging
Supports Auto MDI/MDI-X function
Supports CSMA/CD protocol
LED indicators for easy network diagnostic
FCC, CE class A compliant
SPECIFICATION
Product
Model
FSD-803PE
Hardware Specification
10/100/Base-TX Ports
8 x RJ-45
POE port
1 (port#1)
Switch Processing Scheme
Store-and-Forward
Switch fabric
1.6Gbps
Throughput (packet per second @ 64byte)
1.12Mpps
Address Table
2K entries
Share data Buffer
1024Kbits
Flow Control
Back pressure for half duplex,
IEEE 802.3x Pause Frame for full duplex
Dimensions
160mm x 80mm x 28mm (W x D x H)
Weight
0.4 kg
Power Requirement
48VDC, auto-detect by IEEE802.3af
12VDC, 800mA
LED indicators
System: 2; Power, POE
Per port: 2; Link/Act, 100
Power Consumption / Dissipation
6 Watts, 20 BTU/hr
Temperature
Operating: 0~50 degree C
Storage: -40~70 degree C
Humidity
Operating: 5% to 90%
Storage: 5% to 90% (Non-condensing)
