The POE-150 and POE-150S is an IEEE802.3af Power over Ethernet devices that provide 48V DC over Ethernet cables.
The POE-150/150S product includes two units: an Injector and a splitter. An injector inserts DC Voltage into the CAT 5 cable allowing the cable between the Injector and Splitter to transfer data and power simultaneously. The maximum distance between the Injector and Splitter is up to 100M.
With POE-150 installed, it is combines the Ethernet digital data with power over the twisted pair cables as an injector, and POE-150S, the splitter, shall separate the digital data and the power into two outputs.
With IEEE802.3af Power over Ethernet is installed, the system administrator only have to use a single RJ-45 Ethernet cable to carries both power and date to each device besides POE-150/150S also have following benefit whish is cost saving, ease for networking planning and higher reliability. What more, upon any IEEE802.3af installed, the POE-150 or POE-150S all can make the connection while migrating or splitting the power and the Ethernet digital packets. Providing three kind of DC output, the POE-150S shall provide up to 2A, 1.3A and 1A DC current at model POE-150S-5V, 150S-9V and 150S-12V.
Product Application
For a place hard to find the power inlet, POE-150 and POE-150S, as a pair, should provides the easiest way to power your Ethernet devices such as PLANET ICA-500, Internet Camera on the ceiling, or WAP-4000, Wireless Access Point that installed on the top of the building.
To control the power system of your networking devices, POE-150S can be installed and co-work with third party 802.3af POE injector hub such as building VoIP telephony network in the office. Or, the POE-150 can be directly deployed to connect with third part 802.3af devices like Cisco AP or POE switches that installed 100 meters away.
Key Features
Comply with IEEE802.3af, Power over Ethernet, IEEE802.3/802.3u 10/100Base-TX
Provides 48V DC power over RJ-45 Ethernet cable to device with Ethernet port
LED indicators power input indication
Distance up to 100 meters
Choice of splitter for 5V DC, 9V DC or 12V DC
Auto-detect of POE 802.3af equipment, protect devices from being damaged by incorrect installation
Work with EIA568, category 5, 4-pair cables for 10Base-T or 100Base-TX
SPECIFICATION
Product
Model
POE-150
Standard
IEEE802.3, IEEE802.3u, 10/100Base-TX
IEEE802.3af
Ethernet connector
2 x RJ-45 (1 for Data in, 1 for Data+DC out)
Ethernet data rate
10/100Mbps (vary on Ethernet device attached)
Input voltage
48VDC, 0.4A
Number of devices that can be powered
1
Ethernet data cable
TIA/EIA-568, Category 5/5e cable
LED Indicator
1 x power
1 x POE ready / in-use
Dimensions (L x W x H)
93 x 69 x 25 mm
Product
Model
POE-150S
Standard
IEEE802.3, IEEE802.3u, 10/100Base-TX
IEEE802.3af
Ethernet connector
2 x RJ-45 (1 for Data + DC in, 1 for Data out)
Ethernet data rate
10/100Mbps (vary on Ethernet device attached)
Output voltage / current
Vary on model:
POE-150S-5V: 5VDC, 2A max.
POE-150S-9V: 9VDC, 1.3A max
POE-150S-12V: 12VDC, 1A max.
Number of devices that can be powered
1
Ethernet data cable
TIA/EIA-568, Category 5/5e cable
LED indicator
1 x POE ready/ in-use
Dimensions (L x W x H)
93 x 69 x 25 mm
Ordering Information
POE-150
IEEE802.3af Power Over Ethernet Injector
POE-150S - 5V
IEEE802.3af Power Over Ethernet Splitter with 5VDC output
POE-150S - 9V
IEEE802.3af Power Over Ethernet Splitter with 9VDC output
POE-150S - 12V
IEEE802.3af Power Over Ethernet Splitter with 12VDC output
